First, stop the water
If the water comes from a pipe or fixture, close the nearest shut-off valve, or the main valve if you cannot find one. If it comes from above during a thaw, it is probably an ice dam or a roof problem, and a roofer should look at it as soon as the weather allows. Do not climb onto an icy roof yourself.
If the water has reached a light fixture, turn off its breaker at the panel before going near it.
A bulging ceiling needs care
A ceiling that is bulging downward may be holding water. Keep people out from underneath it, set a bucket below the lowest point and, only if you can reach safely from a stable ladder, make a small hole at that point with a screwdriver to let the water drain in a controlled way. That small hole is far easier to repair than a ceiling that gives way.
Dry the room
Move furniture and rugs out of the wet area, run fans across the surface and use a dehumidifier with the doors closed. In a Michigan winter, gentle heat helps; in a humid summer basement, the dehumidifier does most of the work. Take off baseboard along a wet wall so air can reach the bottom of the board.
Check how wet it really is
A stain shows where water dried, not how far it went. An inexpensive pin-type moisture meter, or the one the repair pro brings, tells you whether the material behind the paint is still damp. Take readings across the stain and a foot or two beyond it, and repeat them over a few days. Readings that keep falling mean the drying is working.
Decide what has to be cut out
Drywall that has stayed firm and dries out fully can often stay, given a coat of stain-blocking primer and painted. Drywall that has gone soft, crumbles, sags, has delaminated or smells musty should be cut out back to sound material, along with any wet insulation behind it.
Plaster behaves differently. It tolerates a wetting better than drywall, but it can let go of its lath as it dries, so tap it and press it once it is dry. A hollow sound or movement means it needs securing before it is refinished.
In the basement, the usual line is a straight cut a little above the highest damage, with the new board kept just off the floor.
Keep a record as you go
Photograph the damage before anything is moved or removed, note the dates and keep receipts. If an insurer or landlord becomes involved, that record will help.
Mistakes worth avoiding
Painting over a stain while the board behind it is still damp traps the moisture and the mark comes back. Closing up a wall before the framing has dried invites mold. Running a space heater close to wet plaster can make it crack as it dries too fast. And pulling down a sagging ceiling by hand, rather than draining it first, sends wet gypsum and water onto whoever is underneath.
When to call
Once the source is stopped and the readings are falling, the repair can be planned. If you would like the drying checked and a price for the work, please get in touch; the visit includes a moisture check before anything is patched.
Related pages:
When you are ready, ask for a moisture check and a price. Other topics will be listed on the guides index as they are added.